High-Capacity Ammunition Magazine Ban of 2013 - Amends the Brady Handgun Violence Prevention Act to prohibit the importation, sale, manufacture, transfer, or possession, in or affecting interstate or foreign commerce, of a large capacity ammunition feeding device.
Defines a "large capacity ammunition feeding device" to: (1) mean a magazine, belt, drum, feed strip, or similar device that has an overall capacity of, or that can be readily changed to accept, more than 10 rounds of ammunition; and (2) exclude an attached tubular device designed to accept, and capable of operating only with, .22 caliber rimfire ammunition.
Provides exemptions for: (1) devices lawfully possessed before this Act's enactment; (2) federal, state, and local agencies and law enforcement officers; (3) licensees under the Atomic Energy Act for on-site security, off-site training, and transportation of nuclear materials; and (4) authorized testing or experimentation by a licensed firearms manufacturer or importer.
Requires a device manufactured after this Act's enactment to be identified by a serial number and the date it was manufactured conspicuously engraved or cast on the device.
Sets penalties for violations. Subjects devices used or involved in knowing violation of such Act to seizure and forfeiture.
Amends the Omnibus Crime Control and Safe Streets Act of 1968 to authorize the use of Edward Byrne Memorial Justice Assistance Grants for buy-back programs for surrendered large capacity ammunition feeding devices.
[Congressional Bills 113th Congress]
[From the U.S. Government Publishing Office]
[S. 691 Placed on Calendar Senate (PCS)]
Calendar No. 36
113th CONGRESS
1st Session
S. 691
To regulate large capacity ammunition feeding devices.
_______________________________________________________________________
IN THE SENATE OF THE UNITED STATES
April 9, 2013
Mr. Blumenthal (for Mr. Lautenberg (for himself, Mrs. Feinstein, Mr.
Blumenthal, Mr. Murphy, Mr. Whitehouse, Mr. Cowan, Ms. Hirono, Mr.
Kaine, Mr. Merkley, and Mr. Rockefeller)) introduced the following
bill; which was read the first time
April 10, 2013
Read the second time and placed on the calendar
_______________________________________________________________________
A BILL
To regulate large capacity ammunition feeding devices.
Be it enacted by the Senate and House of Representatives of the
United States of America in Congress assembled,
SECTION 1. SHORT TITLE.
This Act may be cited as the ``High-Capacity Ammunition Magazine
Ban of 2013''.
SEC. 2. DEFINITIONS.
Section 921(a) of title 18, United States Code, is amended by
inserting after paragraph (29) the following:
``(30) The term `large capacity ammunition feeding device'--
``(A) means a magazine, belt, drum, feed strip, or similar
device, including any such device joined or coupled with
another in any manner, that has an overall capacity of, or that
can be readily restored, changed, or converted to accept, more
than 10 rounds of ammunition; and
``(B) does not include an attached tubular device designed
to accept, and capable of operating only with, .22 caliber
rimfire ammunition.
``(31) The term `qualified law enforcement officer' has the meaning
given the term in section 926B.''.
SEC. 3. RESTRICTIONS ON LARGE CAPACITY AMMUNITION FEEDING DEVICES.
(a) In General.--Section 922 of title 18, United States Code, is
amended by inserting after subsection (u) the following:
``(v)(1) It shall be unlawful for a person to import, sell,
manufacture, transfer, or possess, in or affecting interstate or
foreign commerce, a large capacity ammunition feeding device.
``(2) Paragraph (1) shall not apply to the possession of any large
capacity ammunition feeding device otherwise lawfully possessed on or
before the date of enactment of the High-Capacity Ammunition Magazine
Ban of 2013.
``(3) Paragraph (1) shall not apply to--
``(A) the importation for, manufacture for, sale to,
transfer to, or possession by the United States or a department
or agency of the United States or a State or a department,
agency, or political subdivision of a State, or a sale or
transfer to or possession by a qualified law enforcement
officer employed by the United States or a department or agency
of the United States or a State or a department, agency, or
political subdivision of a State for purposes of law
enforcement (whether on or off duty), or a sale or transfer to
or possession by a campus law enforcement officer for purposes
of law enforcement (whether on or off duty);
``(B) the importation for, or sale or transfer to a
licensee under title I of the Atomic Energy Act of 1954 for
purposes of establishing and maintaining an on-site physical
protection system and security organization required by Federal
law, or possession by an employee or contractor of such
licensee on-site for such purposes or off-site for purposes of
licensee-authorized training or transportation of nuclear
materials;
``(C) the possession, by an individual who is retired in
good standing from service with a law enforcement agency and is
not otherwise prohibited from receiving ammunition, of a large
capacity ammunition feeding device--
``(i) sold or transferred to the individual by the
agency upon such retirement; or
``(ii) that the individual purchased, or otherwise
obtained, for official use before such retirement; or
``(D) the importation, sale, manufacture, transfer, or
possession of any large capacity ammunition feeding device by a
licensed manufacturer or licensed importer for the purposes of
testing or experimentation authorized by the Attorney General.
``(4) For purposes of paragraph (3)(A), the term `campus law
enforcement officer' means an individual who is--
``(A) employed by a private institution of higher education
that is eligible for funding under title IV of the Higher
Education Act of 1965 (20 U.S.C. 1070 et seq.);
``(B) responsible for the prevention or investigation of
crime involving injury to persons or property, including
apprehension or detention of persons for such crimes;
``(C) authorized by Federal, State, or local law to carry a
firearm, execute search warrants, and make arrests; and
``(D) recognized, commissioned, or certified by a
government entity as a law enforcement officer.''.
(b) Identification Markings for Large Capacity Ammunition Feeding
Devices.--Section 923(i) of title 18, United States Code, is amended by
adding at the end the following: ``A large capacity ammunition feeding
device manufactured after the date of enactment of the High-Capacity
Ammunition Magazine Ban of 2013 shall be identified by a serial number
and the date on which the device was manufactured or made, legibly and
conspicuously engraved or cast on the device, and such other
identification as the Attorney General shall by regulations
prescribe.''.
(c) Seizure and Forfeiture of Large Capacity Ammunition Feeding
Devices.--Section 924(d) of title 18, United States Code, is amended--
(1) in paragraph (1)--
(A) by inserting ``or large capacity ammunition
feeding device'' after ``firearm or ammunition'' each
place the term appears;
(B) by inserting ``or large capacity ammunition
feeding device'' after ``firearms or ammunition'' each
place the term appears; and
(C) by striking ``or (k)'' and inserting ``(k), or
(v)'';
(2) in paragraph (2)(C), by inserting ``or large capacity
ammunition feeding devices'' after ``firearms or quantities of
ammunition''; and
(3) in paragraph (3)(E), by inserting ``922(v),'' after
``922(n),''.
SEC. 4. PENALTIES.
Section 924(a)(1)(B) of title 18, United States Code, is amended by
striking ``or (q)'' and inserting ``(q), or (v)''.
SEC. 5. USE OF BYRNE GRANTS FOR BUY-BACK PROGRAMS FOR LARGE CAPACITY
AMMUNITION FEEDING DEVICES.
Section 501(a)(1) of the Omnibus Crime Control and Safe Streets Act
of 1968 (42 U.S.C. 3751(a)(1)) is amended by adding at the end the
following:
``(H) Compensation for surrendered large capacity
ammunition feeding devices, as that term is defined in
section 921 of title 18, United States Code, under buy-
back programs for large capacity ammunition feeding
devices.''.
SEC. 6. SEVERABILITY.
If any provision of this Act, an amendment made by this Act, or the
application of such provision or amendment to any person or
circumstance is held to be unconstitutional, the remainder of this Act,
the amendments made by this Act, and the application of such provision
or amendment to any person or circumstance shall not be affected
thereby.
Calendar No. 36
113th CONGRESS
1st Session
S. 691
_______________________________________________________________________
A BILL
To regulate large capacity ammunition feeding devices.
_______________________________________________________________________
April 10, 2013
Read the second time and placed on the calendar
Introduced in Senate
Introduced in the Senate. Read the first time. Placed on Senate Legislative Calendar under Read the First Time.
Read the second time. Placed on Senate Legislative Calendar under General Orders. Calendar No. 36.
Llama 3.2 · runs locally in your browser
Ask anything about this bill. The AI reads the full text to answer.
Enter to send · Shift+Enter for new line